Home>Products>70x180x42 bearing>70 mm x 180 mm x 42 mm FAG NJ414-M1 cylindrical roller bearings
FAG NJ414-M1 MODELS
Need a CAD or 3D Model?
70 mm x 180 mm x 42 mm FAG NJ414-M1 cylindrical roller bearings
category
70x180x42 bearing
FAG NJ414-M1 Bearing SPECIFICATIONS
What is the best place to buy 70 mm x 180 mm x 42 mm FAG NJ414-M1 cylindrical roller bearings online? 70x180x42 bearing Manufacturing Service 70 mm x 180 mm x 42 mm . ISB BEARING USA CO., LTD.
- FAG
NJ414-M1
- Contact with Slinger
- UCST200C4HR23
- 35 mm
- Cast Iron
- Set Screw
- 22.2 mm
- Lubrication Fitting
- 63.5 mm
-
ISB BEARING USA CO., LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Details of70 mm x 180 mm x 42 mm FAG NJ414-M1 cylindrical roller bearings
- Contact with Slinger
- UCST200C4HR23
- 35 mm
- Cast Iron
- Set Screw
- 22.2 mm
- Lubrication Fitting
- 63.5 mm
- Side Mount
- 13.5 mm
- 70 mm x 180 mm x 42 mm
FAG NJ414-M1 Types of70 mm x 180 mm x 42 mm FAG NJ414-M1 cylindrical roller bearings
FAG NJ414-M1 bearing Size Chart (mm/inches) | |
---|---|
Series | 30240 |
Cone Part Number | X30240 |
Cup Part Number | Y30240 |
Design Units | METRIC |
Bearing Weight | 25.700 Kg |
Cage Type | Stamped Steel |
d | 200 mm |
D | 360 mm |
B - Cone Width | 58.000 mm |
C - Cup Width | 48 mm |
B | 64.000 mm |
R - Cone Backface To Clear Radius1 | 5.080 mm |
r - Cup Backface To Clear Radius2 | 0.00 mm |
da - Cone Frontface Backing Diameter | 227.08 mm |
db - Cone Backface Backing Diameter | 230.89 mm |
Da - Cup Frontface Backing Diameter | 337.06 mm |
Db - Cup Backface Backing Diameter | 331.00 mm |
Ab - Cage-Cone Frontface Clearance | 9.7 mm |
Aa - Cage-Cone Backface Clearance | 4.6 mm |
a - Effective Center Location3 | 7.9 mm |
C90 - Dynamic Radial Rating (90 million revolutions)4 | 231000 N |
C1 - Dynamic Radial Rating (1 million revolutions)5 | 891000 N |
C0 - Static Radial Rating | 1330000 N |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 172000 N |
K - Factor7 | 1.34 |
e - ISO Factor8 | 0.44 |
Y - ISO Factor9 | 1.38 |
G1 - Heat Generation Factor (Roller-Raceway) | 876.8 |
G2 - Heat Generation Factor (Rib-Roller End) | 106.9 |
Cg - Geometry Factor | 0.135 |
FAG NJ414-M1 INTERCHANGE
70x180x42 bearing Part series NJ414-M1 is a potential replacement for these common bearing part numbers:
NJ414-M1
NJ414-M1
NJ414-M1
NJ414-M1
NJ414-M1
NJ414-M1
NJ414-M1
NJ414-M1
Contact Us

- ISB BEARING USA CO., LTD.
- AddressBishop Court, P.O. Box ,Mount Prospect, U.S.A.
- Phone(Working Time)+1-334-391-3294
- Fax
FAG NJ414-M1 Technical Articles
How do I make my bearings faster? |
How do you check the end float on a shaft? |
How does a one way needle bearing work? |